• Product
    • Product
    • Supplier
Advanced

AJ-306 3 holes End Clip of Sprinkler Hoses(rain pipe, rain tape, micro spray hose)

Model No.
AJ-306
Made in
Taiwan
Supplier
AN JARL ENTERPRISE CO., LTD.More About This Product
Request for Quotation

Make sprinkler hose clean easy

Spec

  • Garden Sprinklers Type : N/A
  • Garden Water Connectors Type : Quick Connectors
  • Garden Water Guns Feature : Variable Flow Controls
  • Garden Water Guns Type : N/A
  • Garden Water Timers Type : N/A
  • Sprayers Type : N/A
  • Sprayers Use : Agriculture,Garden

Key Features

Our garden hose connectors and end stops can easily be installed on garden sprinkler hoses. The end stop can be used to stop the water flow, making for reduced costs and higher water usage efficiency.

     Installing DEAR DEER sprinkler hose to branch from the main pipe, it needs a few  simple fittings to lead the water into sprinkler hose and stop water at the end. With these DEAR DEER fittings to fit sprinkler hoses, we can easily build up a high-efficient irrigation system with low cost and labor. These DEAR DEER fittings include plastic ball valve, quick nipple, "Y" shape quick nipple, end clip and ground fixer. 

      To install single sprinkler hose, triple sprinkler hose or 2 wings sprinkler hose,  firstly we connect a plastic ball valve to water supply pipe for  controlling  water flow. In general, we use 1-1/4" or 3/4" both side female thread valve to connect a quick male thread nipple, then to connect the pipe.

      The next step is screwing this DEAR DEER quick nipple into the valve then put on the hose from the other end. This hose must be inside the ring, that let us can pull backward of the ring to lock tighten the sprinkler hose. For the triple sprinkler hose or 2 wings sprinkler hose we must fold in 2 hoses or 2 wings at 2 sides tightly close to the quick nipple and let all the hose through inside the ring too.

      Another DEAR DEER quick nipple is AJ-304 the "Y" shape quick nipple, it's for AJ-102 DEAR DEER twin sprinkler hose, it is one male thread with 2 branches with the ring. To lock twin sprinkler hose, you have to cut apart the link part of 2 hoses of twin sprinkler hose for about 20 cm length and then locked at each branch of twin quick nipple.

Thirdly there is a quick connector with 2 rings. It can connect 2 sections of flat hose while the length of hose must extend. This quick connector also can repair the broken hose. We can cut the broken section out and reconnect 2 sections with this quick connector.

Specifications of quick nipples and quick connectors

Item No.

                Description

   Material

     Valve end size

   Lock end size

AJ-303

quick male thread nipple 1 1/4"

ABS black

1 1/4" male thread

1 1/4" ring lock

AJ-303

quick male thread nipple 1"

ABS black

1 1/4" male thread

1" ring lock

AJ-303

quick male thread nipple 3/4"

ABS black

3/4" male thread

3/4" ring lock

AJ-303N

quick no thread nipple 3/4"

PVC gray

3/4" no thread

3/4" ring lock

AJ-304

twin quick male thread nipple 1 1/4"

ABS black

1 1/4" male thread

3/4" x 2 rings lock

AJ-305

quick connector

ABS black

1 1/4" ring lock

1 1/4" ring lock

AJ-305

quick connector

ABS black

1" ring lock

1" ring lock

AJ-305

quick connector

ABS black

3/4" ring lock

3/4" ring lock

Last one of sprinkler hose fittings is the end stopper. There are 2 types of end stopper. In general we use end clip with or without fixing holes. End clip is convenient for stopping water at end of sprinkler hose. It can easy to open or close. While there is dirt in the hose we can open the end clip to flush the dirt out and reclose to stop water for spray. The fixing holes are prepared for insert fixer in the ground to prevent wind or some other things to make the sprinkler hose move. The widest flat hose this end clip can be used is 10.5cm.

Another end stopper is rod tighten stopper. It is special for thicker or wider flat hose. The widest flat hose this rod tighten stopper can be used is 14.5cm. The main components are a flat block with a long opening at middle and a long rod. To set it we must fold back a section of end flat hose and pull this folded section through the opening from one side to the other side at the flat block. Then we pull the rod at this side through the interspace between folded flat hose till the end of rod insert into a locker at the end of the flat block and the rod will be locked by this locker. At last we draw the flat hose to tight the rod. While we fill water into the flat hose the end of the flat hose will be swollen that pull the rod pressing to stop the water.

All the 2 types stopper have fix hole beside the middle section of stopper. These holes can fix the stopper by a fixer. While we pull the sprinkler hose tight at the end and fix the end stopper, all the sprinkler hose will be moving prevent associatedly.

All the fittings for sprinkler hose irrigation are popularly used in any farm irrigation or garden irrigation no matter field irrigation, net house irrigation, greenhouse irrigation.

Product Certification

Payment Details

  • Payment Terms : TT ,L/C ,PayPal ,Alipay
  • Minimum Order : 1,000 Piece(s)

Last Update : 2019-10-13
LoadingLoading ...


The purpose of Slider Kit is to gather common slideshow-like jQuery functionalities (such as news sliders, photos galleries/sliders, carousels, tabs menus)

When tracking mouse movement, you usually need to know the actual position of the mouse pointer. The event object that is passed to the handler contains some information about the mouse coordinates.

Step 1Fill in the formStep 2Completion

Mr.蔡福得 , AN JARL ENTERPRISE CO., LTD.

USD
Insert a template
0/1500

File formats: htm, html, doc, docx, pdf, txt, jpg, gif, png. Max 3 files (10MB in total).

Total size:0

  • +

This helps to more precisely match your inquiry with potential suppliers.Use "," or "enter" to separate multiple keywords.

Please fill in all required fields.

    Recommendations

    Loading ...

    Small Order Recommendation

    Loading ...